Ferroresonant constant current charge available in 25 amp or 50 amp output models
Fully-integrated microprocessor control for dv/dt or elapsed time termination (Elapsed time selectable for 8, 12, 18 or 24 hours)
Charge over-discharged and sulfated batteries
Auto start with five second delay
Multi color LEDs indicating charging status and fault shutdown
Red push button for manual shutdown
Manual elapsed timer button
Supplied with seven foot AC line cord with 20 amp 120 V plug (Hard wired on HV models only, 208, 240 or 480)
Eight foot long output cables with dual connectors (SB175 and SB350)
Automatic Shutdown for the Following Conditions
Maximum or minimum cells are too high or too low
Charging current is too low
Battery cable is disconnected while charging
Elapsed time timer expired
CAUTION: DISCONNECTING THE BATTERY FROM THE CHARGER DURING THE CHARGE CYCLE WITHOUT MANUALLY STOPPING THE CHARGER CAN CAUSE DAMAGE TO BOTH OPERATORS AND EQUIPMENT AND VOID THE WARRANTY