Headquarters
N56 W16665 Ridgewood Dr. Menomonee Falls, WI 53051
The BHS BE-SS single side battery extractor is fully hydraulic, track-mounted and floor-driven. Designed with a heavy-duty structure and a durable powder coat finish to resist both acid and scratches. The low-maintenance design reduces the frequency for preventative maintenance.
Control Circuit Voltage | 120 V ac |
Full Load Capacity | 4,500 lb |
Draw Bar Pull / Magnet | 800 to 1,200 lb |
Vacuum | 21" HG / 711 mbar |
Vacuum Pump | 1/3 hp / 0.25 kW |
Hydraulic Pump | 2 gal/min / 7.57 L/min |
Hydraulic Power Unit | 2 hp / 149 kW |
AC Current Draw | 5.8 / 2.9 A |
Extractor Arm Reach (Beyond Roller Bed) | 9" |
Vacuum Release Time | < 1 s |
Vacuum Attach Time | < 1 s |
Raise / Lower Speed | 8 ft/min / 0.04 m/s |
Travel Speed | 60 ft/min / 0.30 m/s |
Input Voltage | 240/480 V / 3 ph / 60 Hz |
Total Compartment Rollers | 6 |
Draw Bar Pull / Vacuum | 1,000 lb |
Extractor Arm Travel Speed | 0 to 20 ft/min / 0 to 0.10 m/s |
Wheel Base (Front to Back) | 75.75" |
Guide Track | 2" x 2.5" Angle |
Roller Height | 5.5" Min / 25.5" Max |
Wheel Base (Side to Side) | 56.13" |
Battery Compartment Width | 36.38" |
Maximum Battery Dimensions (L x W x H) | 45" X 35" X 36" |
Minimum Battery Width (w/ magnet) | 6" |
Minimum Battery Length | 24" |
Minimum Battery Height | 19" |