Headquarters
N56 W16665 Ridgewood Dr. Menomonee Falls, WI 53051
BHS MBE: Mobile Battery Extractor
The BHS Mobile Battery Extractor is a self-contained extractor that enables you to change batteries anywhere in your facility. Designed for versatility to accommodate a wide-range of applications that require up to 50 battery changes per day. A minimum of 16 ft. aisle clearance is required.
Benefits
- 24 volt powerhead eliminates need for a separate pallet jack
- Pendant control for ease of operation
- Restraint bar contains battery during transit
- Hydraulic powered extraction
- Roller and slide strip combination provides increased battery stability
- Built-in battery and charger for convenience
- Standard industrial components allow for local parts availability
- Heavy-duty steel frame handles toughest applications
- Low maintenance design reduces operating costs
- Durable two-part epoxy finish resists both acid and scratches
Features
- Vacuum extraction
- Rubber bumper
- Pendant control
- Safety shield
- Roller/Slide strip combination
- Restraint bar
Specification
| Minimum Battery Width | 7.5" |
| Roller Width | 41.88" |
| Ground Clearance | 0.75" |
| Turning Radius | 8 ft |
| Grade Clearance | 2% |
| Hydraulic Pump | 1.3 gal/min |
| Hydraulic Power Unit | Gear, Fixed Displacement |
| Raise / Lower Speed | 8.8 ft/min |
| Extractor Arm Travel Speed | 22 ft/min |
| Battery Attachment Mechanism | Vacuum Standard, Magnet Optional |
| Vacuum Cup Size | 12" |
| Minimum Service Aisle Width | 16 ft |
| Push/Pull Drive Chain Size | #50 |
| Roller Shaft Size | 0.75" |
| Roller Diameter | 2.4" |
| Battery Compartment Width | 42" |
| Maximum Battery Dimensions (L x W x H) | 49" x 41" x 32.5" |
| Minimum Battery Length | 18" |
| Minimum Battery Height | 21" |
| Dimensions | 108"L x 63.5"W x 79.5"H |