BHS BE-TS: Triple Stack Battery Extractor
The BHS BE-TS Triple Stack battery extractor is an ideal solution for forklift fleets with 150 to 299 batteries.
- Vacuum extractor arm adjustable for various reach requirements
- Quiet-running dual floor drive system provides positive traction on wet or dry surfaces
- BHS exclusive Non-Inter-Flow (NIF) hydraulic manifold system stabilizes the lift cylinders to ensure a level roller bed during load transfers
- Four lift cylinders, in combination with four-point equalization, assure smooth and level vertical movement of the roller bed when empty or loaded
- Five hydraulic-powered rollers per compartment provide a brake for safe, easy battery transfer
- Induction-type proximity switch disables floor drive to protect equipment when the extractor arm is outside the envelope of the compartment
| Vacuum Release Time | < 1 s |
| Vacuum | 21" Hg / 711 mbar |
| Vacuum Pump | 1/3 hp / 0.25 kW |
| Hydraulic Power Unit | 20 hp / 14.9 kW |
| Control Circuit Voltage | 120 V ac |
| AC Current Draw | 35 A |
| Vacuum Attach Time | < 1 s |
| Draw Bar Pull / Magnet | 800 lb to 1,200 lb |
| Raise / Lower Speed | 0 to 26 ft/min / 0 to 0.13 m/s |
| Travel Speed | 0 to 240 ft/min / 0 to 1.22 m/s |
| Input Voltage | 480 V / 3 ph / 60 Hz |
| Draw Bar Pull / Vacuum | 1,000 lb |
| Hydraulic Pump | 22 gal/min / 83 L/min |
| Full Load Capacity | 10,000 lb |
| Guide Track | 3" x 2.5" Angle |
| Roller Height | 6.5" Min / 96" Max |
| Total Compartment Rollers | 11 |
