Discontinued: SBS-700: Multi-Function Oscilloscope

This product has been discontinued.

Oscilloscope & Multimeter w/ PC Integration Software

The SBS-700 o-scope/meter helps minimize your project risk by providing reliable, accurate data or waveform capture and the complete view of logic tools.

This comprehensive unit offers a highly accurate multimeter measurement function and additional function on Sig‑Out (Generator), Digital Debug (Logic, Serial Bus Protocol with Digital Pattern Generator). This unit includes a case and USB PC Integration software so that you can download your readings into your PC. You can also recall readings and graphs directly from the unit.


  • 10 MHz bandwidth with max. 50 MS/s real sampling rate
  • AC/DC coupling
  • Wide direct input voltage – up to 100V/div in 1,2,5 steps
  • Multiple advanced programmable trigger modes
  • Advanced auto-set functions automatically catch and display waveform


  • 600 V CAT III & 1000 V CAT IV DMM / 300 V CAT III O-Scope
  • Efficiency measurement and ripple noise measurement
  • Large 50,000 count, 3.5" high resolution LCD, displays DC Voltage, True RMS AC V
  • Includes real-time PC connection/logging
  • Multiple logging sessions possible without download

Graphical Digital Multimeter

  • 50,000 count True RMS 3.5" high resolution display DC V, True RMS AC V, AC+ DC V, DC A, True RMS AC A
  • Volts, currents, frequency, resistors, capacitance, diode, continuity, frequency - duty cycle - pulse width, signal out generation, dBm
  • Temp., humidity, hi-current, pressure measurement through AUX (external adapters not included)
  • Min/max, autorange, (manual) hold, auto hold, peak hold, bar graph display, REL, warning mode, simultaneous multiple display: present measurement, min/max/avg/dBm in real-time stamping

Logic Analyzer

  • Achieve the fastest logic analyzer control and analysis to maximize your analyzer’s usage. Sets up measurements quickly and easily.
  • 8 input channels supported
  • Sample rate: maximum 50 MHz per channel
  • Peak detection and time measurements supported
  • Trigger Mode: pattern and duration supported

Protocol Analyzer

  • Sample Rate: maximum 50 MHz per channel
  • Peak detection and time measurements supported
  • Trigger Mode: CAN, LIN, I2C, UART, USB (low/full speed), I2S, SMBus, SPI, DMX512, 1-Wire supported
  • Supports trigger condition setup and speed selection if needed

Digital Pattern Generator

  • An essential feature for digital system development. Digital pattern is automatically displayed on protocol analyzer screen without connecting with the oscilloscope
  • 2 channels (TX, RX) supported
  • Baud rate: up to 1 Mbps
  • Pattern format: UART, CAN, and user defined
  • Supports making and storage of up to 8 patterns including information like interval, repetition, and idle condition
  • Monitoring mode supported for watching pattern waveform or data transaction

SBS-700 Includes

  • Main unit
  • Carrying case
  • Pinpoint probes
  • Software/USB cable
  • AC adaptor
  • Quick start guide


Weight 1.200000
Battery Type 7.2V rechargeable NiMH battery pack
Maximum Voltage Terminal to Earth Ground 1000 Vac
Display Type 3.5" 240 x 160 pixel graphic mono LCD
Storage Temperature 32° F to 158° F
Operating Temperature 32° F to 122° F
Humidity 80% RH or less (non-condensing)
Battery Life 80 hours continuous without backlight
Dimensions 3.9" W x 8.6" H x 2.1" D

Parts & Accessories

Accessory Ordering Information
Part No. Description
600/700-TEST-LEAD-KIT Test lead accessory kit

More Info

Technical Data
DC/AC Voltage Range
50.000mV 500.00mV 5.0000V 50.000V 500.00V 1000.0V
50mV (±0.05%+50) 500mV-50V (±0.025%+10) 500V-1000V (±0.030%+10)
DC/AC Current Range
500.00µA 5.0000mA 50.000mA 500.00mA 10.000A
500mA-5.0000mA (±0.05%+10) 50mA-500mA (±0.15%+10) 10A (±0.30%+10)
Temperature (excluding probe)
(-20.0 ~ 500.0° C, -20.0° ~ 1370.0° C) or (-4.0° ~ 500.0° F
N56 W16665 Ridgewood Dr. Menomonee Falls, WI 53051
Copyright © 2021-present Exponential Power Privacy Policy - Legal - Sitemap