Headquarters
N56 W16665 Ridgewood Dr. Menomonee Falls, WI 53051
Arga Battery Monitor Panel Mount
The Arga Battery Monitor Panel Mount from Electroswitch monitors battery voltage and ground fault detection for DC systems. A LED display identifies alarm conditions in addition to audible alarms. Easily calibrate and set alarm thresholds through the front panel menu.
Alarm functions: battery voltage, ground fault detection, AC power loss, ripple voltage, ripple current, high impedance and predictive corrosion detection.
Remote monitoring and reporting is ideal for multiple and distant locations. The Arga Battery Monitor Panel Mount supports Serial DNP3.0, Modbus and RS485 communications.
Features
- Adjustable alarm threshold set points
- High / low battery voltage alarms
- ± Ground fault detection with alarm
- AC charger power loss
- High accuracy ± 0.2 VDC
- Open cell / AC charger malfunction alarm
Additional Options
- Optional predictive corrosion detection alarm
- Optional handheld ground fault detector
- Handheld unit with on / off and volume adjust switch
- LED and audible indicators for detected ground faults
- Optional 19" rack (consult factory)
Remote Monitoring and Reporting
- Serial DNP3.0, Modbus, RS485: 2-wire standard, 4-wire optional
- 4 “Form C” dry contact alarm outputs
- Analog current outputs (standard 4 to 20 mA)
Specification
| Voltages | 24 VDC, 48 VDC, 125 VDC, 250 VDC |
| Standard Part Numbers | 25-1000-125A for 125 VDC installations 25-1000-250A for 250 VDC installations 25-1000-48A for 48 VDC installations For 19" Rack (single meter) 15-1000-125A-1 for 125 VDC installations 15-1000-250A-1 for 250 VDC installations 15-100 |
| Contact Rating | 2A at 120 VAC or 28 VDC, 25 mA at 150 VDC |
| Standard Outputs | Digital: DNP3.0, Modbus Analog: 4~20 mA |
| Alarms | Alarm relays are Form C contacts Relay 1: + ground fault Relay 2: - ground fault Relay 3: high battery voltage Relay 4: low battery voltage, open battery, loss of AC to charger |
| Voltage Indication | 0 to ± 199.9 VDC in 0.6" bright red LED digits and decimal point Accuracy is ± 0.2 VDC (125 VDC model) |
| Ground Resistors | 30.83 KΩ ± 1% from each bus to ground (for 125 V battery) 60.50 KΩ ± 1% from each bus to ground (for 250 V battery) 15 KΩ ± 1% from each bust to ground (for 48 V battery) |
| Battery Input | 50–180 VDC, 3VA (for 125 V battery) 100–360 VDC, 5VA (for 250 V battery) 36–72 VDC, 3VA (for 48 V battery) |
| Dimensions | 4.33" W x 4.33” H |